Mt Kisco, NY
Phone : 800 244 5432
Fax : 914 244 9210
Butcher Block Installation Guide
1. Provide
as much support as possible.
2. Do
not install if the block is rocking on the sub-surface.
3. Clean
sub-surface with alcohol to remove excess oil
or
dust before adhering.
4. Use high
quality 100% silicone as an adhesive and bed for the block.
5. Screws
should be used only if absolutely necessary.
An oversized hole (5/8”) and fender washer (1/4”) may be used through
the cabinet top. This will allow the
block to expand and contract. Important
: Do not
screw the top down without
the ability to move.
This will cause cracking, splitting, and failure outside the warranty.
6. Seal
any dishwasher, under
counter oven, fridge compartment, or heated plenum, with a sheet metal cover so as to
keep out heat and steam.
7. Set top in a bed of Silicone (this allows for future movement)
8. Give top a coat of Weiman's Furniture Cream (all natural) or Brooks Butcher Block Oil. Buff out to a high protective sheen.
9.
We have a three week production schedule. The top's finish is still fresh and
needs to cure and harden. Do not put weight and heavy use items on your top for
about a month.
Note: If we have packed and shipped a top to you, inspect the crate for damage before signing the shippers bill of lading .
If any crate damage exists which might indicate that the top may be affected do not accept the shipment . Ask the truckman to return the shipment to us.
Download Order form for material sample
The Highest Quality
Competitive Prices and Fast Delivery Times
Information on the ordering process
|
Use Pricing Forms ToGet a BUDGET QUOTE:
Wood Tops Metal Tops Concrete Tops Glass Tops Hoods Backsplash Panels Sinks Steel Doors |
Or for a Technical Estimate, email your specs to: Quotes@Brookscustom.com
Please feel free to call and discuss your project
Brooks Custom
15 Kensico Dr, Mt Kisco,NY,10549
Phone : 800 244 5432
Fax : 914 244 9210
© Copyright 1995-2007 By Brooks Custom
All Rights Reserved